✓Gas permit required for furnace or boiler replacements
✓New ductwork and ventilation systems require permits
✓Licensed HVAC contractor must pull the permit in most provinces
✅ Exemptions
Routine furnace filter replacement, thermostat swap, or duct cleaning does not require a permit.
Required Inspections
1
Rough-in inspection
2
Final inspection
How to Apply in Vancouver
1
Check if you need a permit
Review the requirements above. For a hvac / mechanical, a permit is always required.
2
Prepare your documents
Gather drawings, site plans, and specifications. For larger projects, you may need drawings stamped by a licensed engineer or architect.
3
Submit to Development Services
Apply online at https://vancouver.ca or visit in person at 515 W 10th Ave, Vancouver, BC V5Z 4A8.
4
Wait for approval
Vancouver typically processes hvac / mechanical permits in 1–3 weeks. You will receive a permit number when approved.
5
Post permit & book inspections
Post your permit on site. Book required inspections at each stage — do not cover work before it is inspected.
FAQs — HVAC / Mechanical Permit in Vancouver
How much does a hvac / mechanical permit cost in Vancouver?
HVAC / Mechanical permit fees in Vancouver typically range from $100–$400. Fees are usually based on the estimated project value. Contact Development Services at 604-873-7611 to get an exact quote for your project.
Can I do my own hvac / mechanical without a contractor?
Homeowners can often pull their own permits for work on their primary residence. However, electrical and plumbing work typically requires a licensed trade. Check with Development Services for specific rules.
What happens if I skip the permit?
Unpermitted work can result in fines, orders to undo completed work, problems with home insurance claims, and difficulty selling your home. It is always worth the time to verify permit requirements.